The popularity of vinyl fencing is no longer a myth. It has become the most demanded fencing material to replace wooden structures like gazebos and fencing. As vinyl is long-lasting, durable, and easy to maintain, more users are switching to it. Unlike wooden fences, vinyl does not crack over time. Not only that, it is durable enough to withstand harsh weather conditions.
The best part is that USA-made vinyl fencing is easy to maintain since, after painting, the paint quickly gets absorbed. Not only that, scratches or dents are not visible on these fences. So, compared to a wooden fence, vinyl is a great alternative. Also, you will get it in various designs and colors.
If you are planning to install them on your property, there are a few steps that you need to follow. First, you will need certain tools, like the posthole digger, to create holes in the ground. Do not forget about a level to ensure that everything is straight. Finally, you will need a shovel to pour concrete while installing.
Before installing the USA-made vinyl fencing, check with the neighbors and go through your house documents. Find out if you can legally install fences around your property. Be careful while installing the fences and avoid damaging any underground pipes.
Before installing the fences, draw a rough line where you want to install the fences. When buying fences from vinyl fencing manufacturers, you will get posts where you have to install them. If your fence has any specialties, consider that.
Once the initial steps are over, you have to start digging. Naturally, the size of the hole for the posts will differ. A standard process to follow is to dig holes at least 2-3 times bigger than the diameter of the posts. Then, depending on the post size, you only have to make minor changes.
While digging, keep checking the depth of the holes. You can always add or remove dirt depending on the depth. But you can’t reverse the process after you add the concrete.
Add the concrete. In this process, you won’t have to be picky regarding the buying of concrete. Make sure to follow the directions on the USA-made vinyl fencing package. It will ensure that the post stays in place.
Next, you have to add the panels. Once the concrete dries, add the panels to your fence. You have to do this before adding the second post. However, you must dig the hole beforehand to avoid damaging the panel.
Keep repeating the process as mentioned above until the installation process is complete. You will need manual labor to install these fences. Therefore, it is better to hire others to lighten the load.
Longevity of vinyl fences
Vinyl fencing manufacturers recommend installing vinyl fences since they increase the aesthetic value of your house. These fences are also best for adding security, especially if you want to give a vintage charm to your house. Besides, these can maximize the value of your property.
A wooden fence is quite sturdy, but their lifespanis not great. For example, if you have lived in your house for over a decade, you might have to repair it. However, when it comes to USA-made vinyl fencing, they have a longer lifespan. Even the maintenance is not that extensive, like wooden fences.
While a wooden fence will last for fifteen years, when cared for properly, a vinyl fence will last for twenty to thirty years. Moreover, most vinyl fences have a lifetime warranty. Also, they are eco-friendly and recyclable.
Hence, these are the detailed steps and the longevity information you should know about vinyl fencing.