Vital Things to Consider While Installing Vinyl Perimeter Fence

Vital Things to Consider While Installing Vinyl Perimeter Fence

Vinyl fences help in offering the needed privacy. Not only that, fences keep your pets protected and add an attractive look to your property. Besides, vinyl fences are durable and will last longer in the upcoming years. In addition, it will help in saving money in the long run. First, however, you must follow the right installation process for the best-selling vinyl fence.

Installing the vinyl fences is one of the easiest processes. First, you must mix concrete and dig holes in the installation areas. After that, you can insert the fencing poles. The DIY method helps you save about one third of the total installation cost. Hiring a professional will become costly since you have to pay the labor cost.

Besides, before getting into vinyl perimeter fencing installation, do not forget to consider the common pitfalls. For example, poor preparation work, setting posts roughly, and ignoring the building regulations can bring trouble. Therefore, you must keep a few things in mind while installing fences.

Prepare your yard

Before you start preparing your yard, book a utility company. Therefore, you will need the professionals to mark the mentioned lines. The digging process takes a week to complete but, do not skip it. Digging for the vinyl perimeter fencing without any idea can be dangerous, so take caution.

Also, check the property line if you plan to install the fence on your yard’s edge. Although this step might sound inconvenient, you don’t want to install the fence in your neighbor’s yard.

After locating the utility lines, mark your fence’s perimeter using spray paint. Later on, you have to remove any rocks, debris, or plants in the area where you want to install the fence.

Avoid installing the posts closely

The best-selling vinyl fence is undoubtedly durable and bends without breaking. As a result, it can withstand wind gusts and minor impacts. However, the flexibility of a fence depends entirely on the proper installation method. Therefore, it becomes too rigid and limits the fence’s ability to bend.

Make sure to install the fences keeping gaps between the poles. Like wood, vinyl fences expand and contract. The difference is that wood swells due to moisture, but vinyl expands in the heat. Installing the fence panels too close to each other leaves no room for expansion.

It can warp the fences, so to stop this, install the fences keeping a distance of a few millimeters between each panel.

Never dig shallow holes

The posts will hold the fences firmly. Therefore, you have to set the posts firmly in the ground. If you live in a location that experiences frequent storms or has soft soil, you must be careful with the installation process. Also, posts installed in shallow holes will lean due to the weight of the fence or even blow off in extreme weather.

Wondering how deep to install the best-selling vinyl fence posts? The depth requirements change depending on the climate and the soil conditions. First, ensure that one-third of the post is under the ground. 

Install the end and corner posts

Lining the posts accurately is a difficult task for successful vinyl perimeter fencing. Installing the fencing posts is undoubtedly critical. Therefore, you don’t want to dig up posts and reinstall them once again. To do things properly, ensure you align the end and the corner posts properly. After that, use a string line as the guide, and install the fence posts one by one.

Proper leveling is required

While installing vinyl fences, people often think about saving time by checking whether the posts are leveled. However, it is better if you avoid doing it. 

To check whether the posts are level and the height is even, use a string line between the end posts and the corner posts. Also, don’t forget to use a bench level to ensure the lines are leveled. Finally, check that the posts in between meet the string line.

Avoid installing all the panels together

Unlike installing posts, which is quite hectic, installing best-selling vinyl fence panels is easy. You have to snap the fence panels together without using any tools. However, you must not speed up the process during the installation.

Instead, it is a good idea to install a single fence at a time. Ensure that each panel is on level after installation. If you brought the fence in single panels, don’t forget to check the top and bottom rails before connecting. Hammer the high posts before cementing the entire set. Also, correcting the fences one by one instead of doing everything in one go is far better.

Hammering the material is a big no

In every aspect, vinyl is durable compared to other fencing materials. However, a blunt force can break the fence. Although it is inaccurate to call vinyl perimeter fencing fragile, a sudden hammer swing will crack a vinyl fence. 

While installing the fence, it is best not to use a hammer.. One of the best ways of avoiding hammers is using blocks as buffers. A block will evenly distribute the force on the fence, and it won’t crack.

Therefore, these are a few do’s and don’ts that you must consider if you are thinking about installing vinyl fences on your property.

Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)